We provide full range of products that enable smooth implementation of fully Integrated Building Management Systems in all types and sizes of projects. Our solution includes products and software required to implement forefront BMS, Energy Management, Lighting Control, Home Automation, Hotel Guest Room Management, Access Control & Intruder Detection and Video Surveillance Systems.
Total overview and control
The FX-2030A is fully programmable native BACnet™ building automation controller, equipped with a stable Windows CE professional, in a durable industrial PC housing. It’s internal web- and FTP-server allow easy access to and control over the pages you show. Running the open standard IEC 61131-3 for PLC programming, this freely programmable controller can manage all the I/O points you need for your projects. The controller uses standard BACnet MS/TP or Modbus RTU communication to our I/O modules to seamlessly connect sensors, pumps, motors, fans, actuators, coolers or any other equipment you might want to control or communicate through BACnet/Modbus with other equipment, such as frequency converters or pumps. The FX-2030A comes standard with three Field bus ports. You can extend the FX-2030A’s reach even more with one or more multiLINK modules to connect supplementary Modbus or M-bus loops.
| BACnet Device Profile: | BACnet Building Controller (B-BC) |
| BACnet data point objects: | 2000 (Physical and Virtual) per controller |
| CPU: | NVIDIA Tegra 2 dual-core Cortex-A9 (32 Bit) MPcore |
| Memory: | 512MB DDR2 |
| Operating system: | Windows CE Professional |
| Operating temperature: | 0 to +50°C |
| Operating Voltage: | 12 to 24 VDC |
| Maximum Load: | 750mA |
| Communication Ports: | 1 x 10/100 Ethernet port, 3 x RS-485 Ports, 1 x modem port, 1 x USB, 1 x DVI Port |
| Dimensions(Back/Front panel): | 264x230mm/280x246mm (x58mm depth) |
| History trends: | 20,000 changed values per point |
| Maximum fieldbus connection: | 3 built-in serial ports and 5 IP ports |
| Installation: | On substation door (protection class up to IP54) |
Fielbus ports: use a serial port to connect modules using BACnet MS/TP or Modbus RTU, RS-485. The maximum number of modules per loop is 63, addressed from 1-63. To connect more fieldbus loops, ask for the additional ports to be installed. Up to three fieldbus ports can be installed. If you need more, you can use our multiLINK communication module to add three additional Modbus or M-bus ports.
Other ports: Use the DVI port to connect an external display, and the USB port to connect an external mouse and/or keyboard. The serial COM1 port can be used with a standard SMS modem. The RJ45 ethernet port can be used with a fixed IP address, or the substation can get an address through the network’s DHCP server.
Programming: The FX-2030A has an embedded FTP and web server. The pages you make with our HTML editor, that contain the point names that are linked to physical points, will be shown locally in the exact same way you can consult them remotely with a standard browser. At startup, the local browser is started full screen, offering the end user the exact view you want them to see.Use our Integrated Development Environment FX-Editor, combining the webpages you create (HTML), the point programming and the PLC code (using IEC 61131-3 standards), to create, manage and maintain projects fast and efficiently.
Networking: FX-2030A’s can exchange information with each other over a TCP/IP network, offering virtually unlimited expansion of the system. The controllers can share measurements (e.g. outside temperature) or other relevant point data. The FX-2030A can also transmit information to a Fidelix webVision SCADA server with its own user interface to make control and management even easier by offering a dedicated multi-station overview and grouping measurements and/or history data from several controllers into easy and clearly understandable reports.
Micro SD card: The Micro SD card has a dual functionality. The FX-2030A automatically makes weekly backups to the Micro SD card (during night time), something you can also do manually through the user interface or by briefly (< 1 sec.) pushing the reset button (though pressing the reset button will also restart your system after the backup has been made). When using a 24 VDC power supply, the capacitor gets charged enough to take a backup of the point data in case of a rupture in power supply.
On the other hand, the Micro SD card can also be used to restore the system to a previous state, or to quickly load complete programs in projects where you have multiple identical systems.
Developed by Qbicblack Technologies
